Ball screw linear actuator 12volt dc 50mm stroke 400n load, compact size, ip65
Specification of linear actuator
Item name | Linear Actuator |
Max. stroke | 600MM |
Max. Static load | 2000N |
Max. Dynamic load | 2000N |
Operation Speed | 10mm/s/1200n
5mm/s/2000n |
Input Signal | 3.3VDC, 5VDC |
Position Detection | Potentiometer / Hall sensor (s) |
Motor | Brushed DC motor |
Degree of Protection | IP65 |
Screw Type | Trapezoidal screw |
Power Input | 48V/36V/24V/12V |
Self-locking ability | YES |
Operating temperature | -35℃~65℃ |
Optional 1 | Installation size |
General Features
Voltage of motor 12, 24 DC,
Maximum load 2,000N in push
Maximum load 2,000N in pull
Maximum speed at full load 11mm/s (with 1000N in a push or pull condition)
Stroke 30~600mm
Minimum installation dimension Stroke + 115mm (with Hall sensor(s) or without output signals)
Color Grey
Certificate
IP rating Up to IP66
Operational temperature range -40˚C~+65˚C
Operational temperature range +5˚C~+45˚C at full performance
Options POT, Optical, Hall sensor(s)
We mentioned about IP rating, do you know what the mean of IP number:
IP Rating Reference Chart
Below is an easy to follow reference chart to know IP rating you use now |
| IP Number | First Digit - SOLIDS | Second Digit - LIQUIDS |
| IP43 | Protected from tools and small wires greater than 1 millimeter. | Protected from water spray less than 60 degrees from vertical. |
| IP54 | Protected from limited dust ingress. | Protected from water spray from any direction. |
| IP65 | Protected from total dust ingress. | Protected from low pressure water jets from any direction. |
| IP66 | Protected from total dust ingress. | Protected from high pressure water jets from any direction. |
Stroke & Mounting dimensions of linear actuator
| Linear Actuator | Stroke ±2(mm) | Mounting dimensions±3(mm) | Without Feedback |
| Stroke | 50 | 100 | 150 | 200 | 250 | 300 | 350 | 400 | 450 |
| Size | 165 | 215 | 265 | 315 | 365 | 445 | 495 | 545 | 595 |
| Linear Actuator | Stroke ±2(mm) | Mounting dimensions±3(mm) | With Hall sensors |
| Stroke | 50 | 100 | 150 | 200 | 250 | 300 | 350 | 400 | 450 |
| Size | 165 | 215 | 265 | 315 | 365 | 445 | 495 | 545 | 595 |
Load & Speed & Current of Linear Actuator
| Code | Dynamic Load (N) | Speed±10% (mm/s) | Amp (in normal temperature) |
| 24V |
| Free load | Full load | Free load | Full load |
| A | 2000 | 5 | 4 | < 0.6 | < 2 |
| B | 1600 | 7 | 5.5 | < 0.6 | < 2 |
| C | 1200 | 10 | 8 | < 0.6 | < 2 |
| D | 800 | 10 | 8 | < 0.6 | < 2 |
| E | 400 | 16 | 11 | < 0.6 | < 2 |
| F | 1000 | 28 | 22 | < 0.6 | < 2 |
| G | 200 | 55 | 45 | < 0.6 | < 2 |
Newton (N) to Pound (lbs)
| Newton | 2500 | 2000 | 1600 | 1200N | 1000N | 800N | 500N | 200N | 100N |
| LBS | 550 | 440 | 350 | 264 | 220 | 176 | 110 | 44 | 22 |
Below you can see the correlation between STROKE and LOAD of MICRO LINEAR ACTUATOR.
Stroke Range
(mm) | Max Load (Newton) |
| 501-600 | 400 |
| 401-500 | 800 |
| 301-400 | 1200 |
| 201-300 | 1600 |
| 30-200 | 2000 |
Picture of industrial Linear Actuator
